motion sensor light switch,infrared motion sensor, control switch(BS037)
sensor switch Instruction
The product adopts good sensitivity detector, integrated circuit. It gathers automatism, convenience, safety, saving-energy and practicality functions. The wide detection field is consisting of detectors. It works by receiving human motion infrared rays. When one enters the detection field, it can start the load at once and identify automatically day and night; its installation is very convenient and its using is very wide. It has functions of power indication and the detection indication
sensor switch SPECIFICATION:
Power Source: 110 -240V/AC | Detection Range: 360° |
Power Frequency: 50Hz | Working Temperature: -20°C~+40°C |
Ambient Light: 3-2000LUX (adjustable) | Working Humidity: <93%RH |
Time-Delay: min: 10sec±3sec | Installation Height: 2.2-4m |
Max: 7min±2min | Power Consumption: 0.45W (work) 0.1W (static) |
Rated Load: 1200W (incandescent lamp) 300W (energy-saving lamp) | Detection Motion Speed: 0.6 ~1.5m/s |
sensor switch FUNCTION:
- Can identify day and night: The consumer can adjust work ambient light. It can work in the daytime and at night when it is adjusted on the “sun” position (max). It can work in the ambient light less than 3LUX when it is adjusted on the “moon” position (min). As for the adjustment pattern, please refer to the testing pattern.
- Time-Delay is added continually: When it receives the second induction signals after the first induction, it will compute time once more on the basic of the first time-delay rest.
- Time–Delay is adjustable. It can be set according to the consumer’s desire. The minimum time is 10sec±3sec. The maximum is 7min±2min.
sensor switch INSTALLATION: (see the figure)
- Switch off the power.
- Turn clockwise the bottom-stand and take off it. The power wire cross the hole in the middle of bottom-stand.
- The bottom-stand is fixed on the selected position with inflated screw.
- Connect the power and the load into the connection-wire column of the sensor according to connection-wire diagram.
- The sensor aimed at the mouth of bottom-stand and turned anti-clockwise.
sensor switch CONNECTION-WIRE DIAGRAM:(See the right figure)
sensor switch NOTES:
- Electrician or experienced human can install it.
- he unrest objects can’t be regarded the installation basis-face.
- In front of the detection window there aren’t hinder or unrest objects effecting detection.
- Avoid installing it near air temperature alteration zones for example: air condition, central heating, etc.
- Please don’t open the case for your safety if you find the hitch after installation.
- If there are some difference between instruction and the function the product has, please give priority to product and sorry not to inform you additionally.
motion sensor application:
motion sensor certification: